HP Color LaserJet 4700 - Page 203

Control panel message Description Recommended action
3 for more information, see Clearing jams.
4 If the message persists after clearing
all pages, contact HP Support at
http://www.hp.com/support/clj4700.
20 INSUFFICIENT MEMORY
For help press
alternates with
20 INSUFFICIENT MEMORY
To continue press
The printer has received more data from
the computer than fits in available memory.
1 Press to continue printing.
NOTE A loss of data will
occur.
2 Reduce the complexity of the print job
to avoid this error in the future.
3 Adding memory to the printer may
allow printing of more complex pages.
22 EIO X
BUFFER OVERFLOW
To continue press
The EIO card in card slot X has overflowed
its I/O buffer during a busy state.
1 Press to continue printing.
NOTE A loss of data will
occur.
2 If the message persists, contact
HP Support at
http://www.hp.com/
support/clj4700.
22 EMBEDDED I/O
BUFFER OVERFLOW
alternates with
To continue press
The embedded JetDirect print server has
overflowed.
Press to continue. When this error
occurs, data might be lost. If necessary,
resend the job to the printer.
22 PARALLEL I/O
BUFFER OVERFLOW
For help press
alternates with
22 PARALLEL I/O
BUFFER OVERFLOW
To continue press
The parallel buffer has overflowed during a
busy state.
1 Press to resume printing.
NOTE A loss of data will
occur.
2 If the message persists, disconnect the
parallel cable at both ends and
reconnect.
3 If the message still persists, contact
HP Support at
http://www.hp.com/
support/clj4700.
22 USB I/O
BUFFER OVERFLOW
To continue press
The USB buffer has overflowed during a
busy state.
1 Press to continue printing.
NOTE A loss of data will
occur.
2 If the message persists, contact
HP Support at
http://www.hp.com/
support/clj4700.
ENWW Control panel messages 187