Issue Cause Solution
Thesealingtapehasnot
been removed from the print
cartridge.
Remove the sealing tape from
the print cartridge for the color
that is missing. See
Changing
print cartridges.
Another print cartridge may be
low.
Check the supplies gauge on
the control pa
nel o r print a
supplies status page. See
Printer information pages.
Inconsistent colors after
installing a print cartridge
Print cartridges may be
improperly installed.
Verify that each print cartridge
is installed properly.
Extremely light screen colors
are not being printed.
The software application may
interpret extremely light colors
as white. If so, avoid using
extremely light co lors.
Extremely dark screen colors
arebeingprintedinblack.
The software application may
interpret extremely dark colors
as black. If so, avoid using
extremely dark colors.
Printedcolorsdonotmatch
screen colors
The colors
on the c omputer
screen differ from the printer
output.
In the prin
ter driver’s Color
Control tab, select Screen
Match.
Note
Several fa
ctors can influence
your ability to match printed
colors to those on your scre en .
These fac
tors include paper,
overhead lighting, software
applications, operating system
palettes
, monitors, and video
cards and drivers.
173 Chapter 8 Problemsolving EN_WW
To Next Page
Loading...
