Control-panel overlay (base model)
TIP: It is not necessary to remove the original overlay to install a replacement overlay. However,
installing more than three replacement overlays over the original might interfere with the operation of
the control panel buttons.
1. Carefully peel the control-panel overlay off of the control panel.
2. Handle the overlay by the edges to avoid touching the adhesive back. To reinstall the overlay, place
it on the control panel, and then firmly push down on the overlay to adhere it to the product.
Figure 6-4 Remove the control-panel overlay (base model)
112 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...