Paper-handling problems
Jams
Recover jams
When the jam recovery feature is turned on, the product reprints any pages that are damaged during a
jam. To turn on jam recovery, you must use the embedded Web server (EWS) or HP ToolboxFX.
Use the EWS to set jam recovery (network models only)
1. At a networked computer, open the EWS.
2. Click the System tab.
3. Click System Setup.
4. In the Jam Recovery drop-down list, select On.
5. Click Apply.
Use HP ToolboxFX to set jam recovery
1. Open HP ToolboxFX.
2. Click the Device Settings folder, and then click System Setup.
3. Next to Jam Recovery, select On from the drop-down list.
ENWW Paper-handling problems 219
To Next Page
Loading...