Memory-card reader PCA (fax/memory-card models only)
1. Remove the following components:
●
Right cover. See
Right cover on page 132.
●
Front-right cover. See
Front-right cover on page 137.
2. Release one tab (callout 1), and then rotate the memory-card reader PCA assembly away from
the front-right cover.
Figure 6-47 Remove the memory-card reader PCA (fax/memory-card models only) (1 of 2)
1
3. Remove four screws (callout 2), and then separate the memory-card reader PCA from the bracket
to remove it.
Figure 6-48 Remove the memory-card reader PCA (fax/memory-card models only) (2 of 2)
2
ENWW External panels, covers, and doors 139
To Next Page
Loading...