Card cover or blanking cover
CAUTION: Do not lose the clear-plastic light conductor when handling the cover.
NOTE: The base model has a blank cover installed on the right-front cover. The fax/memory-card
models have a card cover installed on the right-front cover.
1. Remove the following components:
●
Right cover. See
Right cover on page 132.
●
Front-right cover. See
Front-right cover on page 137.
●
Memory-card reader PCA (fax/memory-card models only). See
Memory-card reader PCA
(fax/memory-card models only) on page 139.
2. Release one tab (callout 1).
Figure 6-49 Remove the card cover or blanking cover (1 of 2)
1
140 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...