Rear door and rear-lower cover
1. Remove the following components:
●
Right cover. See
Right cover on page 132.
●
Left cover. See
Left cover on page 135.
●
Rear-side cover. See
Rear-side cover on page 142.
2. Remove two screws (callout 1)
Figure 6-55 Remove the rear door and rear-lower cover (1 of 4)
1
3. Release one pin (callout 2) and then slide the rear door and rear-lower cover towards the side of
the product with the interface connectors.
Figure 6-56 Remove the rear door and rear-lower cover (2 of 4)
2
ENWW External panels, covers, and doors 145
To Next Page
Loading...