4. Remove the rear door and rear-lower cover.
Figure 6-57 Remove the rear door and rear-lower cover (3 of 4)
5. Carefully pry the rear-door hinge arms off of the hinge pins on the rear-lower cover to separate the
rear cover (callout 3) from the rear door (callout 4).
NOTE: If you are installing a replacement rear-lower door, remove the paper-guide assembly
from the discarded door, and then install it on the replacement door. See
Paper-guide assembly
on page 124.
Figure 6-58 Remove the rear door and rear-lower cover (4 of 4)
3
4
146 Chapter 6 Removal and replacement ENWW