Scanner assembly
1. Remove the right cover. See Right cover on page 132.
2. Disconnect one ground-wire lug (callout 1), two wire-harness connectors (callout 2; J4 and P1),
and three FFCs (callout 3; J1, J2, and J3).
Figure 6-59 Remove the scanner assembly (1 of 4)
1
3
2
3. Remove four screws (callout 4).
Figure 6-60 Remove the scanner assembly (2 of 4)
4
ENWW External panels, covers, and doors 147
To Next Page
Loading...