Clear jams from the ADF (fax/memory-card models only)
Occasionally, media becomes jammed during a fax, copy, or scan job.
You are notified of a media jam by the Doc feeder jam Clear, Reload message that appears on the
product control-panel display.
●
The ADF input tray is loaded incorrectly or is too full, or the input tray media guides are set
incorrectly. See
Load paper and print media on page 38 for more information.
●
The media does not meet HP specifications, such as those for size or type. See
Supported paper
and print media on page 36 for more information.
1. Open the ADF cover.
ENWW Paper-handling problems 223
To Next Page
Loading...