Components and major assemblies
Link guide
The link guide rarely fails and is not a FRU.
The link is attached to the paper guide (callout 1) and the rear door (simplex products; callout 2) or
duplexing feed guide assembly (duplex products; callout 3).
If the link-guide attachment at the rear door or duplexing feed guide assembly fails, replace the
appropriate component.
The interior paper guide is not replaceable. If the link guide to paper guide attachment fails, you must
replace the entire product.
Figure 6-15 Replace the link guide (simplex products)
1
2
Figure 6-16 Replace the link guide (duplex products)
3
ENWW Components and major assemblies 93
To Next Page
Loading...