HP Color LaserJet CP2020 Series - Internal Assemblies Removal: Fuser, Paper Path, and Drive Mechanisms

5. Carefully separate the sensor assembly (callout 6) from the product and pass the wire harness
through the hole in the chassis.
NOTE: See callout 4 in Figure 6-83 Remove the color-misregistration sensor assembly PCA
(2 of 5) on page 133.
Figure 6-85 Remove the color-misregistration sensor assembly PCA (4 of 5)
6
6. Remove the sensor assembly from the product.
Figure 6-86 Remove the color-misregistration sensor assembly PCA (5 of 5)
134 Chapter 6 Removal and replacement ENWW