Memory and font DIMMs
Product memory
The product has one dual inline memory module (DIMM) slot. Use the DIMM slot to upgrade the product
with the following items:
●
More product memory (DIMMs are available in 64, 128, and 256 MB)
●
Other DIMM-based printer languages and product options
●
Support-language character sets (for example, Chinese characters or Cyrillic alphabet characters).
NOTE: To order DIMMs, see Order parts, accessories, and supplies on page 230.
You might want to increase product memory if you often print complex graphics, HP Postscript Universal
Emulation Printer Driver documents, or if you use many downloaded fonts. More memory also enables
multiple collated copies to print at the maximum speed.
Before ordering more memory, see how much memory is installed by printing a Configuration page. See
Information pages on page 32.
CAUTION: Static electricity can damage electronic parts. When installing DIMMs, either wear an
antistatic wrist strap, or frequently touch the surface of the DIMM antistatic package and then touch bare
metal.
Install memory and font DIMMs
1. Turn the product off, and then disconnect all power and interface cables.
2. On the right side of the product, open the DIMM access door.
50 Chapter 4 Manage and maintain ENWW
To Next Page
Loading...