Loading program <XX>
Description
Programs and fonts can be stored on the product’s file system and are loaded into RAM when the product is
turned on. The number <XX> specifies a sequence number indicating the current program being loaded.
Recommended action
No action necessary.
NOTE: Do not turn the product off.
Manually feed output stack Then touch "OK" to print second side
Description
The first side of a manual duplex job printed and the product is waiting for the user to insert the output stack
to complete the second side. For the normal Manually Feed message, printing continues automatically when
the paper is reinserted. With this message, printing stops until the user touches the OK button, which allows
time for straightening the output stack.
Recommended action
1. Maintaining the same orientation, remove the pages from the output bin.
2. Flip the document printed side up.
3. Load the document in Tray 1.
4. Touch the OK button to print the second side of the job.
Manually feed: <Type><Size> To use another tray, press “OK”
Description
This message displays when manual feed is selected, Tray 1 is loaded, and other trays are available.
Recommended action
1. Load tray with the requested paper.
2. If paper is already in tray, press the Help button to exit the message, and then press the OK button to
print.
3. To use another tray, clear paper from Tray 1, press the Help button to exit the message, and then press
the OK button.
Moving solenoid and motor
Description
The solenoid and a motor are moving as part of a component test.
Recommended action
No action necessary.
To exit, press the Stop button .
ENWW Tools for troubleshooting 403
To Next Page
Loading...