HP Color LaserJet Professional CP5220 - Page 182

2. Disconnect one connector (callout 1), remove two screws (callout 2), and then remove the Tray 3
pickup motor (callout 3).
Figure 2-118 Remove the Tray 3 pickup motor
2
1
3
Tray 3 driver PCA
1. Remove the tray from the feeder, and then remove the rear cover (see Tray 3 rear cover
on page 161).
2. Disconnect seven connectors, remove two screws (callout 1), release two tabs (callout 2), and then
remove the Tray 3 driver PCA (callout 3).
Figure 2-119 Remove the Tray 3 driver PCA
2
1
3
170 Chapter 2 Removal and replacement ENWW