Secondary transfer roller
CAUTION: Do not touch the spongy roller surface unless you are replacing the roller. Skin oils on the
roller can cause image quality problems.
1. Open the right-door assembly.
2. Grasp one of the blue features (callout 1) on either end of the transfer roller, and then lift the transfer
roller (callout 2) off of the product.
Figure 2-15 Remove the transfer roller
2
1
TIP: Place the new roller assembly in place with the roller gear (callout 1) on the right side, and
then press down to ensure that the roller shaft seats securely in the roller clasps.
1
86 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...