5
Computer Setup
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is
not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate
and make selections.
NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB legacy
support is enabled.
To start Computer Setup:
1.
Turn on or restart the computer.
2.
Before Windows opens and while the “F10=ROM Based Setup” message is displayed in the lower-
left corner of the screen, press f10.
ENWW Starting Computer Setup 97
To Next Page
Loading...
Need help?
General
