Hardware Reference Guide www.hp.com 2–25
Hardware Upgrades
2. Place the side access panel in the proper position on the
chassis and slide it into place 1. Ensure that the hole for the
thumbscrew is aligned with the hole in the chassis and tighten
the thumbscrew 2.
Replacing the Side Access Panel
3. Reconnect the power cable to the computer and plug the cable
into an electrical outlet.
4. Reconnect all peripheral devices to the computer.
Å
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telecommunications or telephone connectors into
the network interface controller (NIC) ports.
5. Turn on the computer by pressing the power button.
376292-001.book Page 25 Friday, February 18, 2005 2:42 PM
To Next Page
Loading...
