HP Compaq dc5750 MT User Manual

CD can be created, due to licensing constraints.
Note: This applies if HP Backup and Recovery Manager was preinstalled.
How to Recover
The HP Backup and Recovery Manager provides two basic recovery
methods. The first, recovery of files and folders, operates in Windows.
The second, PC Recovery, requires a reboot to the Recovery Partition or
from the Recovery Disc Set.
Recovery of Files and Folders
Within Windows, the HP Backup and Recovery Manager provides the
capability of recovering individual files and folder from a backup.
1.
On the Windows Start Menu, select HP Backup and Recovery.
2.
Select the HP Backup and Recovery Manager.
3.
After the Welcome Screen, select Recover important files or the
entire system . Click Next to continue.
4.
Select Recover individual files and data . Click Next to continue.
5.
Follow the wizard to select the files and complete the recovery.
PC Recovery
PC Recovery allows the user to recover from a system error or to return
the PC hard drive to an earlier state in time. The HP Backup and Recovery
Manager must run PC Recovery from the Recovery Partition. There are
two ways to get to PC Recovery:
To get to PC Recovery from Windows:

HP Compaq dc5750 MT Specifications

General

Chipset	ATI Radeon Xpress 1150
Memory	Up to 4 GB DDR2 SDRAM
Network	Integrated Broadcom NetXtreme Gigabit Ethernet
Audio	Integrated High Definition audio
Power Supply	300W
Processor	AMD Athlon 64 X2, AMD Athlon 64, AMD Sempron
Graphics	Integrated ATI Radeon Xpress 1150 or optional discrete graphics
Optical Drive	DVD-ROM, DVD+/-RW
Expansion Slots	1 PCI Express x16
Ports	1 serial, 1 parallel, 2 PS/2, 1 VGA, 1 audio in, 1 audio out
Operating System	Windows XP Professional
Dimensions	16.5 inches
Storage	SATA Hard Drive