HP Compaq dc5750 MT User Manual

Installation
The HP Backup and Recovery Manager is available in two forms:
1.
Shipped preinstalled on the computer
2.
Shipped with HP add-on hardware
How to Install
When preinstalled on the computer, HP Backup and Recovery Manager is
automatically part of the Recovery Partition and when created, the
Recovery Disc Set. This application is already resident on the computer
and will be automatically deployed again when the system is recovered.
When included as part of an HP hardware purchase, the HP Backup and
Recovery Manager is easily installed by running the setup.exe application
from the CD.
Language Support
HP supports the following languages for the HP Backup and Recovery
Manager:

HP Compaq dc5750 MT Specifications

General

Chipset	ATI Radeon Xpress 1150
Memory	Up to 4 GB DDR2 SDRAM
Network	Integrated Broadcom NetXtreme Gigabit Ethernet
Audio	Integrated High Definition audio
Power Supply	300W
Processor	AMD Athlon 64 X2, AMD Athlon 64, AMD Sempron
Graphics	Integrated ATI Radeon Xpress 1150 or optional discrete graphics
Optical Drive	DVD-ROM, DVD+/-RW
Expansion Slots	1 PCI Express x16
Ports	1 serial, 1 parallel, 2 PS/2, 1 VGA, 1 audio in, 1 audio out
Operating System	Windows XP Professional
Dimensions	16.5 inches
Storage	SATA Hard Drive