HP Compaq dc5750 MT User Manual

1.
On the Windows Start Menu, select HP Backup and Recovery.
2.
Select the HP Backup and Recovery Manager.
3.
After the Welcome Screen, select Backup to protect system settings
and important files . Click Next to continue.
4.
Select Backup individual files and folders . Click Next to continue.
5.
Select Backup selected files from most common locations , and click
Next to continue.
6.
Select the types of files to backup.
7.
Add security settings, if desired.
8.
Select the destination for the backup.
9.
Follow the wizard to finish creating the backup.
Note: Advanced Backup is for experienced users and is not covered within
this document.
How to Create Entire Drive Backups
Entire Drive Backups create a full backup of the entire primary hard drive.
The HP Backup and Recovery Manager provides a simple interface for
managing this process.
1.
On the Windows Start Menu, select HP Backup and Recovery.
2.
Select the HP Backup and Recovery Manager.
3.
After the Welcome Screen, select Backup to protect system settings
and important files . Click Next to continue.
4.
Select Backup entire hard drive . Click Next to continue.
5.
After the Welcome screen, select the destination for the backup and
click Next to continue.
6.
Add security settings, if desired.
7.
Follow the wizard to finish creation.
How to Create Recovery Points

HP Compaq dc5750 MT Specifications

General

Chipset	ATI Radeon Xpress 1150
Memory	Up to 4 GB DDR2 SDRAM
Network	Integrated Broadcom NetXtreme Gigabit Ethernet
Audio	Integrated High Definition audio
Power Supply	300W
Processor	AMD Athlon 64 X2, AMD Athlon 64, AMD Sempron
Graphics	Integrated ATI Radeon Xpress 1150 or optional discrete graphics
Optical Drive	DVD-ROM, DVD+/-RW
Expansion Slots	1 PCI Express x16
Ports	1 serial, 1 parallel, 2 PS/2, 1 VGA, 1 audio in, 1 audio out
Operating System	Windows XP Professional
Dimensions	16.5 inches
Storage	SATA Hard Drive