HP Compaq dc7100 DT Supplementary Guide

13
e) Allow devices to enumerate.
f) Reboot as required.
g) Make sure all devices are finished enumerating.
h) Reboot, re-enter F10 Setup, and change the first two USB controllers back to their original IRQs (10
and 11). Alternatively, user can save default settings and exit.
The user should no longer see any issues once this initial enumeration is complete.

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA