2-16 361834-001 Technical Reference Guide
System Overview
Small Form Factor / Slim Tower Chassis
The chassis layouts for the Small Form Factor (SFF) used for the HP Compaq dc7100 models
and the Slim Tower (ST) used for the HP Comapq dx6100 models are shown in Figure 2-13.
Features include:
■ Tilting drive cage assembly for easy access to processor and memory sockets
■ Two configurations:
❏ Without card cage:
◆ Two half-height, full length PCI 2.3 slots
◆ One PCI Express x16 graphics/SDVO slot
◆ One PCI Express x1 slot
❏ With card cage:
◆ Two full-height, full-length PCI 2.3 slots
NOTE:
[1] Accepts PCI-E graphics or reversed-layout ADD2 card.
Figure 2-13. SFF / ST Chassis Layout, Top / Right Side Views
Item Description Item Description
1 Power supply assembly 6 Card cage
2 DIMM sockets (4) 7 Processor socket
3 PCI Express x1 slot 8 Chassis fan
4 PCI Express x16 graphics/reversed-layout SDVO slot [1] 9 Diskette drive bay
5 PCI 2.3 slots (2) 10 CD-ROM drive bay
Chassis without card cage
Chassis with card cage
1
2
3
4
5
6
7
8
-
9
1
2
8
9
-
7
To Next Page
Loading...
