Rear components
Figure 3-2 Rear components
Component Description
1 AC power connector Connects the AC power cable to the monitor.
2 DisplayPort Connects the DisplayPort cable to the monitor.
3 VGA connector Connects the VGA cable to the monitor.
4 DVI-D connector Connects the DVI-D cable to the monitor.
5 Audio connector Connects the audio cable to the monitor.
6 USB upstream connector Connects the USB hub cable to the monitor's USB hub connector
and to a host USB port/hub.
7 USB downstream connectors (2) Connect optional USB devices to the monitor.
8 Passive stylus Housed in rear enclosure. When removed, it can be used as a
touch pointing device.
NOTE: The stylus is not required for optical touch applications.
Fingers and other pointing instruments may be used.
6 Chapter 3 Setting up the monitor
To Next Page
Loading...
