1–4 External Devices
Using a USB device
USB legacy support
USB legacy support (enabled by default) allows you to
■ Use a USB keyboard, mouse, or hub connected to a USB port
on the computer during startup or in a non-Microsoft®
Windows® application or utility.
■ Start or restart from an optional external MultiBay.
To enable or disable USB legacy support:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
f10 while the “F10 = ROM Based
Setup” message is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select System Configuration > Device
configurations, and then press
enter.
3. Use the arrow keys to enable or disable USB legacy support.
4. To save your preference and exit Computer Setup, use the
arrow keys to select File > Save changes and exit. Then
follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
To Next Page
Loading...
Need help?
General