8–4 Software Guide
Computer Setup
Selecting from the Security Menu
.
Select This Option To Do This
Administrator password Enter, change, or delete an HP
Administrator password.
Power-on password Enter, change, or delete a power-on
password.
DriveLock passwords Enable/disable DriveLock; change a
DriveLock user or master password.
✎
DriveLock settings are
accessible only when you enter
Computer Setup by turning on
(not restarting) the notebook.
SmartCard passwords Enable/disable support for Smart Card
passwords.
✎
This feature is only supported by
certain Smart Card Readers.
Refer in this guide to the
“Security” chapter.
Embedded Security
■ Enable/Disable the Embedded
Security Chip.
■ Restore Embedded Security Chip
to factory settings.
✎
Embedded Security settings are
only accessible if the notebook is
equipped with an Embedded
Security Chip.
Device security
■ Enable/disable devices in the system.
■ Enable NIC for inclusion in MultiBoot.
System IDs Enter user-defined identification values.
333634-001.book Page 4 Friday, July 18, 2003 8:47 AM