6–4 Maintenance and Service Guide
Removal and Replacement Procedures
6.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack by following these steps:
a. Turn the notebook upside down with the rear panel
toward you.
Battery Pack Spare Part Number Information
6-cell, 4.8-AHr
6-cell, 4.4-AHr
6-cell, 4.4-AHr
385894-001
385895-001
393549-001
To Next Page
Loading...
