5–18 Maintenance and Service Guide
Removal and Replacement Procedures
5.10 Switch Cover
✎
The switch cover is included in the Miscellaneous Plastics Kits,
spare part number 350130-001 for HP Pavilion zt3000 models,
spare part number 338133-001 for HP Compaq nx7000 models,
and spare part number 337009-001 for Compaq Presario X1000
models.
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Insert a flat-bladed tool under the outside edges of the hinge
cover areas and lift up to disengage the left and right sides of
the cover from the notebook.
4. Remove the switch cover.
Removing the Switch Cover
Reverse the above procedure to install the switch cover.
325388-002.book Page 18 Friday, October 24, 2003 9:21 AM
To Next Page
Loading...
