2–12 Maintenance and Service Guide
Troubleshooting
Flowchart 2.5—No Power, Part 4
Y
N
Continued from
Flowchart 2.4,
No Power, Part 3.
Reseat loose
components and
boards, and
replace damaged
items.
Open
notebook.
Loose or
damaged
parts?
Y
Close
notebook and
retest.
Power on?
Done
N
Replace the following items (if applicable) in
the order given. Check notebook operation
after each of the two following replacement
steps:
1. Internal DC-DC converter, processor, and
system board*
2. Internal AC adapter
*NOTE: Replace these items as a set to
prevent shorting out among components.
325388-002.book Page 12 Friday, October 24, 2003 9:21 AM
To Next Page
Loading...
