5–28 Maintenance and Service Guide
Removal and Replacement Procedures
6. Close the notebook and turn the notebook upside down, with
the rear panel facing you.
7. Remove the following screws:
❏ Two PM2.5×9.5 screws 1 that secure the display
assembly to the base enclosure through the bottom of hte
top cover
❏ Three PM2.5×7.0 screws 2 that secure the display
assembly to the base enclosure through the rear panel
❏ One PM2.5×5.0 screw 3 that secures the display
assembly to the base enclosure through the rear panel
Removing the Display Screws
325388-002.book Page 28 Friday, October 24, 2003 9:21 AM
To Next Page
Loading...
