5–34 Maintenance and Service Guide
Removal and Replacement Procedures
11. Position the notebook so the front faces forward.
12. Remove the following screws:
❏ Two PM2.5×7.0 screws 1 that secure the top cover to the
base enclosure
❏ One PM2.0×3.0 screw 2 that secures the top cover and
modem to the base enclosure
❏ One PM2.5×5.0 screw 3 that secures the top cover to the
base enclosure above the USB connector
Removing the Top Cover Screws
325388-002.book Page 34 Friday, October 24, 2003 9:21 AM
To Next Page
Loading...
