Removal and Replacement Procedures
Maintenance and Service Guide 5–37
3. Disconnect the Bluetooth board cable 1 from the Bluetooth
board.
✎
The Bluetooth board cable is included in the Miscellaneous
Cable Kit, spare part number 336973-001.
4. Remove the two PM1.5×3.0 screws 2 that secure the
Bluetooth board to the top cover.
5. Slide the Bluetooth board forward 3, then lift it up 4 and
remove it from the top cover.
Removing the Bluetooth Board
Reverse the above procedure to install the Bluetooth board.
325388-002.book Page 37 Friday, October 24, 2003 9:21 AM
To Next Page
Loading...
