Removal and Replacement Procedures
Maintenance and Service Guide 5–43
❏ Speaker cover (Section 5.11)
❏ Display assembly (Section 5.15)
❏ Top cover (Section 5.16)
❏ VGA board and shield (Section 5.19)
2. Disconnect the modem cable 1 from the system board.
3. Lift the left side of the modem board 2 to disconnect it from
the system board.
4. Remove the modem board.
Removing the Modem Board and Cable
Reverse the above procedure to install the modem and cable.
325388-002.book Page 43 Friday, October 24, 2003 9:21 AM
To Next Page
Loading...
