HP Compaq NX7300 Getting Started

Backup and recovery
Before creating recovery discs:
■ Obtain high quality CD-R, DVD-R, or DVD+R media.
Formatted DVD±RW and DVD±RW double-layer discs
✎
are not compatible with HP Backup and Recovery
Manager.
■
Number each disc before inserting it into the optical drive
of the computer.
■ If necessary, you can cancel Recovery Media Creator
before you have finished creating the recovery discs. The
next time you open Recovery Media Creator, you will be
prompted to continue the disc creation process where you
left off.
To create a set of recovery discs:
1. Select Start > All Programs > HP Backup & Recovery >
HP Backup and Reco
very Manager.
2. Click Next.
3. Click Create factory software recovery CDs or DVDs to
recov
er the system (highly recommended), and then
click Next.
The “Recovery Media Creator” page opens.
4. Click Next.
5. Click Write to CD/DVD, and then click Next.
6. Follow the on-screen instructions.
Getting Started C–7

HP Compaq NX7300 Specifications

General

Graphics	Intel Graphics Media Accelerator 950
Operating System	Windows XP Professional
Wireless	802.11a/b/g
RAM	512 MB DDR2 SDRAM
Storage	80GB or 120GB HDD
Display	15.4 inch WXGA (1280x800)
Optical Drive	DVD-ROM
LAN	10/100/1000 Ethernet
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone, microphone
Battery	6-cell Lithium-Ion
Weight	2.7 kg