HP Compaq NX7300 Getting Started

First-time setup
Set up the computer
To set up the computer, you will
1. Insert the battery into the computer.
2. Connect the computer to external power.
✎
The battery begins to charge.
3. Turn on the computer.
4. Set up the software.
5. Create recovery discs (recommended).
✎
Refer to Appendix C, “Backup and recovery,” for
instructions.
Ä
CAUTION: To prevent file corruption and to ensure that the correct drivers
are installed:
■ Do not set up the computer for the first time while the computer is
docked in an optional docking device.
■ During the hardware and software setup procedures:
❏ Do not unplug the computer from external power.
❏ Do not shut down the computer or initiate Sleep or
Hibernation.
Getting Started 1–3

HP Compaq NX7300 Specifications

General

Graphics	Intel Graphics Media Accelerator 950
Operating System	Windows XP Professional
Wireless	802.11a/b/g
RAM	512 MB DDR2 SDRAM
Storage	80GB or 120GB HDD
Display	15.4 inch WXGA (1280x800)
Optical Drive	DVD-ROM
LAN	10/100/1000 Ethernet
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone, microphone
Battery	6-cell Lithium-Ion
Weight	2.7 kg