Setting passwords in Computer Setup
Computer Setup passwords Function
Setup password Protects access to Computer Setup.
Power-on password Protects access to the computer contents when the computer
turns on, restarts, or exits Hibernation.
DriveLock master password Protects access to the internal hard drive that is protected by
DriveLock. It is also used to remove DriveLock protection. This
password is set under DriveLock Passwords during the enable
process.
DriveLock user password Protects access to the internal hard drive that is protected by
DriveLock, and is set under DriveLock Passwords during the
enable process.
Smart card PIN Protects access to smart card and Java™ Card contents, and
protects computer access when a smart card or Java Card and
a smart card reader is used.
TPM embedded security password When enabled as a BIOS password, protects access to the
computer contents when the computer turns on, restarts, or
exits Hibernation.
This password requires the optional embedded security chip
to support this security feature.
4 Chapter 2 Using passwords
To Next Page
Loading...
