2 3
Push the SD/SDHC card into the memory slot until it clicks into place. If the card 4.
does not click into place, repeat the previous step to ensure proper orientation.
Close the Battery/memory card compartment.5.
To remove the SD/SDHC card
Make sure to power off the camera before proceeding. 1.
Removing the memory card while powered on may damage
the card and camera.
Open the battery/memory card compartment. 2.
Gently push the card until it clicks and pushes our of 3.
position.
Carefully pull out the card.4.
To Next Page
Loading...
