6 7
Initial Settings
When you turn on your camera for the rst time, you will be asked to do
the initial settings of your camera. First is the setup of language menu.
Specify in which language menus and messages are to be displayed on the
LCD monitor.
Setting the Language
Press directional buttons to move through the selection.1.
Select a language, and then press 2. OK button
.
Setting the Date & Time
Press left and right direction buttons to move through the selection.1.
Press the up and down buttons to change the value for the date and time.2.
Press 3. OK button
when finished. This will save your date and time settings.
If necessary, press 4. Menu button to close the menu.
At this point, the camera settings are set to the default automatic mode and is ready to
take photos and videos.
To Next Page
Loading...
Need help?
General
