1Ć4 Product Information
C4699Ć90000
The resolution of the plotter output is measured in dots per inch (dpi). The plotter
resolutions for different plotĆquality settings are as follows (see also ' chapter 5):
Print Quality Monochrome Plotting Color Plotting
Fast 300 x 300 dpi 300 x 300 dpi
Normal Addressable 600 x 600 dpi 300 x 300 dpi
Best Addressable 600 x 600 dpi 300 x 300 dpi
The plotter legs are optional. The E/A0Ćsize legs include a media diverter to prevent large
media sizes from hitting the ground. The D/A1Ćsize legs have no media diverter.
The rollĆfeed assembly and legs are optional. The E/A0Ćsize legs include a media diverter to
prevent large media sizes from hitting the ground. The D/A1Ćsize legs have no media
diverter. For additional information on the rollĆfeed assembly ' chapter 5.
Users can order an upgrade kit to upgrade a DesignJet 330 to a Designjet 350C. The kit can
be installed by the user. For additional information ' User's Guide, chapter 6.
(See also ' HP Media Reference Guide)
Monochrome Plotting
Color Plotting
Plain paper and plotter paper HP special inkjet paper
Plain vellum (HP preferred) or equivalent non-HP media
Plain translucent paper (HP preferred)
HP single-matte polyester film
For additional media types available ' User's Guide, chapter 2, w Choosing media.
To Next Page
Loading...
