DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Supplier’s name: Hewlett-Packard Company
Supplier’s address: Avenida Graells, 501
08174 Sant Cugat del Vallès
Barcelona, Spain
declares that the product
Regulatory Model Number
(3)
: BCLAA-0401, BCLAA-0503, BCLAA-0504
Product family: HP Designjet 4000 Printer series, HP Designjet 4500 Printer series, HP
Designjet 4500 Scanner series, HP Designjet 4500 Stacker series
Product options: All
conforms to the following product specifications
Safety: IEC 60950-1:2001 / EN 60950–1:2001
EMC: CISPR 22:1993+A1:95+A2:96 / EN 55022:1994+A1:95+A2:97 Class A
(1)
EN 55024:1998+A1:2001+A2:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
FCC Title 47 CFR, Part 15 Class A
(2)
Additional information
The product herewith complies with the requirements of the Low-Voltage Directive 73/23/EEC and the
EMC Directive 89/336/EEC, and carries the CE marking accordingly.
1. The product was tested in a typical configuration with HP Personal Computer systems and
peripherals.
2. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
● This device may not cause harmful interference.
● This device must accept any interference received, including interference that may cause
undesired operation.
3. The product is assigned a Regulatory Model Number which stays with the regulatory aspect of the
design. The Regulatory Model Number is the main product identifier in the regulatory
188 Chapter 19 Legal information ENWW
Legal information
To Next Page
Loading...
