2
How do I assemble the printer?
● Getting started
● How do I unpack the printer?
● How do I assemble the stand?
● How do I attach the stand to the printer?
● How do I remove packaging materials from the printer?
● How do I assemble the bin?
● How do I switch on the printer for the first time?
● How do I install ink cartridges?
● How do I remove the setup printheads?
● How do I install the printheads?
● How do I install the printhead cleaners?
● How do I load a roll of paper onto the spindle?
● How do I load the paper into the printer?
● How do I connect the printer?
● How do I install accessories?
Getting started
The following topics describe how to assemble your new printer (also described in the
Setup instructions).
Because some of the components of the printer are bulky, you may need up to four
people to lift them. You will also need at least 3 × 5 m (10 × 16 ft) of empty floor
space, and about two hours.
The symbols on the boxes identify the contents. Refer to the table below:
Symbol on box
Contents of box
Printer body
Stand and bin assembly
Consumables box, including ...
Maintenance Kit (please keep this safe)
Spare box (used while attaching the stand to the
printer)
13
How do I assemble the printer?
To Next Page
Loading...
