Media path
(view from
right)
2–20
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 2–20 (seq: 62)
This is the black on page 2–20 (seq: 62)
6 Wind the media from the roll and hold it ready to load into the printer. Hold the
media near its edges, about 18 cm (7 in) from the top.
Don’t hold the media right at the top, as you would have to adjust your grip as you
push it into the printer, and this would probably make you misalign it.
7 Align the right-hand side of the media with the line of holes on the printer.
Working with media
Loading roll media
Localization Note.
To Next Page
Loading...