2–21
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 2–21 (seq: 63)
This is the black on page 2–21 (seq: 63)
8 Make sure the entire top edge of the roll—left and right—is placed inside the entry
slot. While keeping the right-hand side aligned with the line of holes, push the
media up into the entry slot. You will feel the media come up against the media
stops.
9 Using your right thumb, press the Load Media button.
The printer will start to take the media from you. At this point, let go!
MEDIA
2
Working with media
Loading roll media
Localization Note.
To Next Page
Loading...