2–22
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 2–22 (seq: 64)
This is the black on page 2–22 (seq: 64)
Don’t touch the media while the printer feeds it out again a short way, as this
would probably misalign it.
10 Realigning the media is an essential, not optional, part of the roll-loading
procedure.
When the
Align Media light is flashing, the printer is waiting for you to realign the
media, as explained below.
11 Lower the media lever to release the media.
Working with media
Loading roll media
Localization Note.
ALIGN MEDIA
This is the green on page 2–22
(seq: 64)
To Next Page
Loading...