E
Fix the left foot using four screws. Position a foot on the right leg. There are pins to help you to
position the foot correctly. Do not remove the anti-slip
material from the wheel.
Fix the right foot using four screws.
Turn the stand assembly into an upright position as shown
above.
Open the box containing the roll module. Remove the plastic
bag containing the screws.
Please take note of the colored plugs located on the legs. Remove the blue plug on the left leg.
Left leg Right leg
Position a foot on the left leg. There are pins to help you to
position the foot correctly. Do not remove the anti-slip
material from the wheel.
2928 30 31
3332 34 35
To Next Page
Loading...
