EasyManua.ls Logo

HP Designjet 4500 - Page 5

HP Designjet 4500
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D
Lower the left leg onto the left side of the cross-brace. The left
leg will fit only on the left side of the cross-brace.
Fix the left leg to the cross-brace using four screws on the
inner side of the leg.
Fix the left leg to the cross-brace using two screws on the
outer side of the leg.
Lower the right leg onto the right side of the cross-brace. The
right leg will fit only on the right side of the cross-brace.
Fix the right leg to the cross-brace using four screws on the
inner side of the leg.
Fix the right leg to the cross-brace using two screws on the
outer side of the leg
Fix the stand cross-bar using four screws.
Identify the left leg (A) and the right leg (B) as shown above.
Remove the two leg covers from the left leg.
2120 22 23
2524 26 27

Other manuals for HP Designjet 4500

Related product manuals