Press the Reset button to clear the settings you have configured and
reset the program to the default values.
Collate copies
The collate feature allows you to group your copies into sets, and then print a
selected number of these sets on your printer. All of the preview and enhancement
options that are available for single document copying, are also available when
using the collate feature.
1. Press the Copy tab.
2. Feed a document into the scanner, and then press the Collate button
on the main touch screen.
NOTE: The original image is captured as with single-sheet copying, however
it is put on standby in your system instead of being sent to the printer.
3. Feed another document, and then press the Collate button. Continue on in
this manner until all of the documents that you want to be part of the set have
been scanned. You can adjust each copy in the set in the same way you do
with single document copying.
4. Define the number of sets by pressing the Copies button in the Copy tab. The
number of copies indicates how many sets are copied. Each set contains all
of the collated documents.
5. Press the Collate Print button to activate the copy job.
Perform a batch copy
Batch copying means processing more than one original document in one session
without adjusting any settings and without having to press the Copy button for each
Collate copies
19
Basic Operations
HP DesignJet Information Engineering
To Next Page
Loading...
