HP Designjet 4500

8-151
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Roll 1 Module (Front path assembly)
Removal
Switch off the product and remove the power cable.
1. Remove the Roll 1 Right Drawer Cover
⇒
Page 8-138
2. Remove the Roll 1 Left Drawer Cover
⇒
Page 8-140
3. Remove the Roll 1 Drawer
⇒ Page 8-142
4. Remove the Roll 1 Bar
⇒ Page 8-147
5. Press down to release the Right Roll 1
Locking Lever.
6. Press down to release the Left Roll 1
Locking Lever.