HP Designjet 4500

8-156
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Roll 1 BT Arm
Removal
Switch off the product and remove the power cable.
1. Remove the Roll 1 Drawer
⇒ Page 8-142
2. Remove Roll 1 Module (Front Path)
⇒ Page
8-151
.
3. Remove one T-15 screw (Type G) that
secures the right side of the BT Arm.
4. Rotate the white plastic bushing on the
right side of the BT Arm.
5. Remove the spring of the left side of the BT
Arm.