HP Designjet 4500

8-206
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Roll 2 Feed Roller Assembly
Removal
Switch off the product and remove the power cable.
1. Remove the Roll 2 Module
⇒ Page 8-190
2. Remove the Roll 2 Feed Motor ⇒ Page 8-
210.
3. Move the Roll 2 Module on to it´s side.
4. Remove one T-15 screw (Type G) that
secures the white Roll 2 Feed Roller
Bushing from the left side.
5. Rotate the white Roll 2 Feed Roller Bushing
on the left side.